9
Min / Max Button
Press the MAX/MIN button to activate the MAX/MIN recording mode. The
display icon "MAX or MIN" will appear. The meter will change to manual ranging
& display and hold the maximum or minimum reading and will update only when
a new “max or min” occurs.
Press the MAX/MIN key and a blinking “MAX MIN” will appear. The meter will
display the present reading, but will continue to update and store the max and
min readings.
To exit MAX/MIN mode press and hold the MAX/MIN key for 2 seconds.
Zero Button
When testing small capacitance
（
≤9.999nF
), to ensure measurement accuracy,
first press "ZERO", before taking any measurements.
Push the key, the present display value will be stored in memory, then the new
display value is the difference between input value and stored data
Backlight Button
Press the BACKLIGHT button to turn the backlight ON. Press the
BACKLIGHT button again to turn the backlight OFF.
Connection Diagram
1.Black lead in COM terminal
