ENDEAVOUR Int. Ltd. Tel +44 (0) 1225 446770 Fax +44 (0) 1225 446775
13
Long press Jog wheel to go to Main Menu at any time
www.endeavourinternational.ltd.uk
AUTO MODE *
* Only available on the “C” Range.
The auto mode allows the operation of the machine by means of a foot switch ( ), freeing both
hands for better control of the hose. In
Auto Mode
, it is possible to adjust the
Dwell
and the
Opening Time
:
After adjusting the swage size, pressing the foot pedal initializes the auto sequence as follows.
Dwell*:
In order to allow a more controlled and precise swage finish, it is sometimes advisable to maintain
pressure on the ferrule for an extended period of time at the swage diameter. This helps to
minimise the “spring back effect” that a ferrule experiences after swaging, especially on hoses of
larger size.
To set up the dwell time:
From the main menu, scroll to the Dwell option
Spin the jog wheel to adjust the Dwell time in seconds and press to confirm..
Opening Time
In certain circumstances, it may not be necessary to fully open the machine after each swaging
operation, it may save time to open the machine just enough to take the fitting out.
To set up the opening time:
From the main menu, scroll to the Opening Time option
Dwell Time
0.50s
Main Menu
Set Diameter
Main Menu
Dwell
FOOT SWITCH
M/C CLOSES TO
SWAGE SIZE
DWELL TIME
OPENING TIME
