ENDEAVOUR Int. Ltd. Tel +44 (0) 1225 446770 Fax +44 (0) 1225 446775
8
Long press Jog wheel to go to Main Menu at any time
www.endeavourinternational.ltd.uk
ROUTINE MAINTENANCE
Ensure that moving parts are always lightly greased. Where applicable check periodically that the
limit switches and emergency controls are in good working order.
At the top of the machine base, remove the oil filler cap and check that the oil level correct. Where
necessary add oil (ISO 32 Hydraulic oil).
INSTALLATION
The machine must be bolted to a firm workbench in a horizontal position. If a quick change rack is
supplied, the machine must be bolted to it with the bolts supplied. The machine is top heavy,
therefore ensure that it is stable and does not pose a danger for the user or other people.
Three Phase Machines:
When operating the machine for the first time check that the motor rotation direction is correct.
(Three phase machines only) If the motor starts but jaws of the swaging head do not begin to close
when the green button is pressed to swage, the phase rotation of the motor will have to be
reversed. To reverse the rotation of the motor change over any two of the phase cables in the
machine’s plug. A competent electrician should carry out the rewiring of the electric plug.
Single Phase Machines:
Ensure that the power loop is for industrial use, rated for at least 20Amps. Install the machine as
close to the socket as possible. Do not use long extension leads as this increases the current
demand from the machine. Do not connect to residential rated 13Amps loops.
Starting the machine for the first time:
After the machine is connected to the power supply, if the Emergency Stop is pressed, rotate it to
disengage. The LCD screen will still show the E-Stop message. This is a safety measure to avoid
starting the machine by accident. Press the jog wheel once to acknowledge the message and start
the machine..
SAFETY PRECAUTIONS
Switch off machine when not in use, using the latching emergency stop button To unlatch the stop
button twist the red knob clockwise and release.
To stop the machine in an emergency press the RED EMERGENCY STOP BUTTON.
DO NOT START THE MACHINE UNDER LOAD.
ALWAYS RELEASE PRESSURE BEFORE RESTARTING.
ISOLATE THE MACHINE FROM THE ELECTRICAL SUPPLY WHEN NOT IN USE.
Emergency Stop
Restart (
)
