ENDEVCO 2911
INSTRUCTION MANUAL
IM2911
Page 5-2
4.
REPAIR
Repair of the shaker is usually not possible in the field. In the event of a broken wire inside the shaker or something
similar to this, the user can fix it without any problems. The simple design of the shaker has few moving parts and
therefore does not lend itself to many “simple fixes”.
Access to component parts is gained by removal of the three cap head screws that secure the unit's top plate. This
reveals all the moving parts. Further disassembly will not reveal any more user serviceable parts. If no physical damage
can be seen at this point, then the unit should be returned to ENDEVCO.
5.
FACTORY SERVICE
If serious trouble occurs, and the instrument cannot be made to perform specifications, return the shaker to the factory. A
detailed statement describing the fault noted should always accompany it.
ENDEVCO warrants each new instrument to be free from defects in material and workmanship for one year from the
date of sale to the original purchaser. This warranty does not extend to units that have been mistreated, used in violation
of Endevco recommendations, or to units that have been altered or repaired outside of the ENDEVCO factory. Defects
covered by this warranty will be corrected at no charge when the unit is delivered to the factory with all transportation
charges prepaid. If, upon examination, it is found that a defect is not within the scope of this warranty, a statement of
repair charges and a request for authorization to proceed with repair will be submitted to the purchaser.
Address all shipments and correspondence to:
Endevco
Technical Services Dept.
30700 Rancho Viejo Rd.
San Juan Capistrano, CA 92675
