®
LP Gas Outdoor Fireplace
Model No. GAD1001B
6
Installing LP Gas Tank
To operate, you will need one precision-filled standard grill LP gas
tank with external valve threads .
W
CAUTION: LP gas tank must be properly
disconnected and removed prior to moving this
outdoor fireplace.
Inserting LP Gas Tank
W
WARNING: Make sure LP gas tank valve is closed.
1 . Remove door .
2 . Loosen LP gas tank retainer bolt by turning counter-clockwise .
3 . Place precision-filled LP gas tank upright into hole in outdoor fireplace base so the tank
valve is facing the gas line connection .
4 . Secure tank by turning LP gas tank retainer bolt clockwise until tight .
5 . Replace Door .
Connecting LP Gas Tank
1 . Before connecting, be sure there is no debris caught in the
head of the LP gas tank, head of the regulator valve or in the
head of the burner or burner ports .
2 . Connect regulator/hose assembly to tank by turning knob
clockwise until it stops .
Disconnecting LP Gas Tank
1 . Before disconnecting, make sure the LP gas tank valve is
“CLOSED .”
2 . Disconnect regulator/hose assembly from LP gas tank by
turning knob counterclockwise until it is loose .
W
CAUTION: LP gas tank must be properly
disconnected and removed prior to moving
this grill.
3 . Place the protective cap cover on the LP tank and store the
tank outdoors in a well ventilated area out of direct sunlight .
20 lb
9 Kg
17.9 in.
/ 45.5 cm
12.2 in. / 31 cm
BlueRhino.com
Available in U.S. only.
Assembly Instructions (continued)
5
Place Lava Rocks
W
CAUTION: Do NOT dump lava rocks out of package. Carefully
place lava rocks by hand so dust does not clog burner.
W
CAUTION: Do NOT cover pilot housing.
Note: Lava rocks should be 0 .8-2 .0 in . (2-5 cm) long . Approx . 5 .95 lbs . (2 .7 kg) of
lava rocks are needed .
6
Insert Battery
Note: Remove plastic wrapper before installing battery .
C
x 1
