Magical Balancer
1
Warning sign and Precautions for Handling
13
WARNING
Use the operating voltage and current within their ratings.
When moving the Magical Balancer, ensure that there is no obstacle within the
range of movement of the suspended load and the hook.
Always pay attention to the load while operating the balancer.
If the balancer moves opposite to the slide direction of the grip controller, stop the
operation immediately.
To move a load with the plain trolley, do not push the wire rope of the Magical
Balancer, but push the load.
Do not pull the load.
CAUTION
Never use the product if the hook latch is damaged or not functioning normally.
Do not operate the balancer rapidly, for example, by lifting a load up and down
rapidly or stopping suddenly.
Do not use the product while holding a stopper.
Prevent the suspended load from contacting with the wiring and other structures.
Do not hang the curled cord on other objects or pull the cord hard.
Prevent the Magical Balancer or the trolley from colliding with the stopper of the
I-shaped steel (rail) or other structures.
Do not wind up the wire rope rapidly when slack remains in the rope.
Ensure that the lifting height is sufficient for the work.
Do not leave a load suspended.
The suspended load may slowly descend over time. After the work is completed,
lift down the suspended load to the ground.
Do not shut off the power supply or the air supply when the load is suspended.
Smoothly perform the lifting up and down of the suspended load.
Ensure that the bottom hook can rotate smoothly before use.
Correctly place the sling on the hook.
Stop winding up temporarily after the wire rope is tightened.
Note: Do not rapidly hoist the load from the ground.
If the air supply pressure is shut off while the product is being used, the load is
held temporarily and then slowly descends over time.
If you cannot lift down the load due to the winding limit of the wire rope, manually
pull out the wire rope to lift down the load.
