Magical Balancer
5
Usage of Magical Balancer
29
5-3-2 How to suspend a load
WARNING
Before lifting up a load, ensure that the bottom hook latch is set.
While the load is hung on the bottom hook, sliding the grip upward can lift up the workpiece.
1
Hang the load on the bottom hook.
2
Hold the grip and slide it upward.
During sliding of the grip, the Grip lamp (green) turns ON.
3
After the load is lifted up to a desired height, return the grip to the neutral position.
4
The weight of the load is detected and the control mode is switched to the balancing mode.
At this time, the Work lamp (blue) turns ON and a beep sounds.
5-3-3 Balancing mode
CAUTION
When performing the balancing control, ensure that the Work lamp (blue) is turned
ON.
You can directly lift up and down the load while the Work lamp (blue) is turned ON.
1
Ensure that the blue lamp is turned ON.
2
You can hold and lift the load up and down.
5-3-4 How to lift down the load
WARNING
Do not unhook the load from the bottom hook while the control mode is the
balancing mode.
Do not unhook the load from the bottom hook before the bottom hook moves
away from the load completely.
While the load is hung on the bottom hook, sliding the grip downward can lift down the workpiece to
the ground.
1
Lift down the load to the installation point.
2
Slide the grip downward to evacuate air from the main equipment of the Magical Balancer.
3
After ensuring that the bottom hook has moved away from the load completely, unhook the
load from the bottom hook.
5-3-5 Function button
Press the function button to temporarily disable the balancing mode.
The load will maintain its position even if the weight of the load increases or decreases.
However, if a load change occurs instantaneously, the position of the workpiece may shift.
This function can be deactivated by pressing the Function button again.
Note:
The function of this button can be changed.
For details on how to change the settings and functions, refer to "5-7 Function button settings”.
