background image

2

Scope of warranty and liabilities for the equipment

Warranty and liabilities for the equipment

1. We will repair or replace the product free of charge if a failure due to manufacturing defects occurs

under proper usage during the warranty period. For details, contact us or your dealer.

2. The warranty will be void in the following cases:

1) Change of ownership.

2) Repair or modification performed by a party other than the manufacturer, agents, or dealers.

3. The warranty period is one (1) year from the date of purchase.

4. Repairs applicable to any of the following shall be charged even during the warranty period:

1)

Failure/damage caused by incorrect use.

2)

Failure/damage caused by use of non-authorized parts.

3)

Failure/damage caused by fire, earthquake, natural disaster, or other unexpected incident.

4)

Incident caused by fall, shock, negligence, or by inadequate storage.

5)

Failure/damage caused by use of parts or other equipment that are not included in this product.

6)

Replacement of consumables.

7)

Usage in violation of dangers or cautions stipulated in this manual.

8)

Failure/damage caused by any reason that is not attributable to the manufacturer.

5. Warranty exclusions such as opportunity loss.

Either during or after the warranty period, opportunity loss, damage to anything other than our

product(s), or other duties imposed on you/your customer as a result of the failure of our product(s)

are outside the scope of the warranty.

Copyright and liabilities

The copyright for this manual is issued to Endo Kogyo Co., Ltd.

The manual is provided for the limited purpose of supporting the safe and proper use of the product. It

cannot be used for other purposes.

The customer may not use or make copies of this manual, in whole or in part, outside of this purpose

without receiving prior consent from Endo Kogyo Co., Ltd.

The customer is also prohibited from translating or modifying the content of the manual, in whole or in

part.

The content described in the manual is subject to change without advance notice. Please note this in

advance.

Spring Balancer Repair Manual

Summary of Contents for EWS-3
































Reviews: