Scope of warranty and liabilities for the equipment
Warranty and liabilities for the equipment
Definition of intended users for this manual
Operator
Spring Balancer Users Manual
1. We will repair or replace the product free of charge if a failure due to manufacturing defects occurs
under proper usage during the warranty period. For details, contact us or your dealer.
2. The warranty will be void in the following cases:
1) Change of ownership.
2) Repair or modification performed by a party other than the manufacturer, agents, or dealers.
3. The warranty period is one (1) year from the date of purchase.
4. Repairs applicable to any of the following shall be charged even during the warranty period:
1)
Failure/damage caused by incorrect use.
2)
Failure/damage caused by use of non-authorized parts.
3)
Failure/damage caused by fire, earthquake, natural disaster, or other unexpected incident.
4)
Incident caused by fall, shock, negligence, or by inadequate storage.
5)
Failure/damage caused by use of parts or other equipment that are not included in this product.
6)
Replacement of consumables.
7)
Usage in violation of dangers or cautions stipulated in this manual.
8)
Failure/damage caused by any reason that is not attributable to the manufacturer.
5. Warranty exclusions such as opportunity loss.
Either during or after the warranty period, opportunity loss, damage to anything other than our
product(s), or other duties imposed on you/your customer as a result of the failure of our product(s)
are outside the scope of the warranty.
Copyright and liabilities
4
The copyright for this manual is issued to Endo Kogyo Co., Ltd.
The manual is provided for the limited purpose of supporting the safe and proper use of the product. It
cannot be used for other purposes.
The customer may not use or make copies of this manual, in whole or in part, outside of this purpose
without receiving prior consent from Endo Kogyo Co., Ltd.
The customer is also prohibited from translating or modifying the content of the manual, in whole or in
part.
The content described in the manual is subject to change without advance notice. Please note this in
advance.
This manual has been prepared to help all intended users involved with this product. From the stand point of
safety, we have defined intended users according to their ability and experience and provided detailed
descriptions for each group. This manual defines four user levels.
Maintenance
operator
The operator is a user who engages in general operations. Maintenance and other
operations that require special skills are excluded from the general operations. The
operator is therefore not permitted to disassemble the main equipment.
The operator should read the manual thoroughly and carry out their work with
complete understanding of the operating procedures.
In addition to the work of the operator described above, the maintenance operator
is permitted to perform installation, simple troubleshooting, and periodic
inspections. The maintenance operator is required to develop sufficient knowledge
and operating skill for this product. The maintenance operator should read the
manual thoroughly and carry out their work with complete understanding of the
equipment’s characteristics and all work contents.
