• Refit the mirror panel by fixing the side screws back in
place.
• Replace fuse or circuit breaker and switch on. Your light
is now ready for use.
• Activate your new LED mirror by swiping your hand in
front of the sensor.
Commissioning
Instruction leaflet
Liz Mirror
52034
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
Check with your Local Authority or retailer for recycling advice.
Recycling advice
Safety information
Endon Lighting LS9 0SE
• We recommend cleaning with a soft dry cloth. Do not use
solvents or abrasive cleaners as these could damage the
finish.
• Mirror – Use a damp cloth or a propriety glass cleaner.
Do not use abrasive materials as these will damage the
finish.
Live Voltages may be present in this unit even when turned of or when completely disconnected.
For your safety,
always switch off the supply before changing lightbulbs, or cleaning.
The mirror must be replaced immediately should it become cracked or damaged. This fitting must
not be used without the mirror in place.
Replace Cracked Shade
Iss.4 27032017
SUPPLY
NEUTRAL
LIGHT FITTING
BLUE (N
)
EARTH (GREEN/YELLOW)
GREEN/YELLO
W
BROWN (L)
SWITCHED LIVE
Having correctly identified the wiring from your existing light
fitting, pull the wire through the hole and connect to the
connection block inside the product in the following way:
Wiring
Check that...
• You have correctly identified the wires
• The connections are tight
• No loose strands have been left out of the connection
block.
