CLOCK I/O / RESET I/O
Clock and reset are analog logic
INPUT
and
OUTPUT
signals made to synchronize
Ground Control together with other Eurorack gear (typical 1/16
th
notes clock and
reset). The trigger outputs are 0...+10V range10 mSec length to be able to clock
various gear. Trigger inputs are typically 0...+5V expected with the threshold of
0.65V.
Ground Control sends one short trigger from its
RESET OUT
jack on playback
start when you press the
PLAY
button.
Applying a trigger into the
RESET IN
jack (or manually pressing PLAY while the
sequencer is running) will reset all the sequences on all 4
TRACKS D/1/2/3
to the
first step.
There is a row of separate track’s reset inputs, meaning you can apply a trigger
on a certain track to reset it independently from others to the first step. You can
also manually reset certain tracks to the first step by
TRACK D/1/2/3 + PLAY
combo. Each separate track’s reset is synchronized to the grid of each track’s
selected time division (
1/16
by default):
CLOCK OUT
– is a master clock output sent by default in sixteenth notes
(corresponds to PPQN/6 or 1/16
th
notes), therefore is marked with symbol.
Refer to
K / SYNCHRONIZATION / DIVIDERS
below of the
MENU
section on how
to set the
MASTER CLOCK
and its
OUTPUT DIVIDRS
.
Summary of Contents for GROUND CONTROL
Page 1: ...GROUND CONTROL FIRMWARE V 2 10 ...
Page 5: ...BLACK PANEL DESIGN NEW SILVER PANEL DESIGN ...
Page 6: ...INTERFACE ...
