Installation
Kit CSF48
10
Hauser
3. Screw the hose tail together with the drainage flange und put the flat sealing ring into the cut-out on
the drainage flange.
a0016263
4. Screw the drainage flange with the hose tail and the flat sealing ring toghether with the sampler.
Thereon you can affix hoses to drain liquids controlled from the sampling compartment (not
contained in the scope of delivery).
a0016262
5. Peel the protective foil back from the stand.
6. Remove the back plane from the stad. Therefor unscrew the four screws. This is necessary to screw
the stand together with the sampler.
a0016251
