Rev B 2022/03
71
CyBio Well vario
Operation
Trigger carriage or rotary stage motion, using
or
as necessary to reach
the required position.
To raise the lifter, use
, to lower the lifter, use
.
You should also note the following:
If a 96-channel capillary magazine has been inserted, a positional shift must be
included for 384-well or 1536-well processing. The same applies in the case of 1536-
well processing with a 384-channel capillary magazine. If this is not the case, con-
.
Always define the type of plate to be processed in the
[Configuration]
=>
[Wells]
menu (
To transfer the XY-stage into the correct position, proceed as follows:
3.
Raise the lifter into trigger position by pressing
, lower the lifter by pressing
, so it will move out of the microplate wells.
Note:
With the lifter in this position, you can use
or
as necessary to set the
following XY-positions:
Fig. 76:
Display - dispense with position selection
4.
Select
[Start]
menu item.
Note:
On selection of
[Exit]
, you can exit the
[Manual]
menu without actually triggering
the process.
Fig. 77:
Display – dispensing – start
CAUTION
Prevent damage to a capillary due to faulty settings for dispensing position.
Transfer the XY-stage into the correct position for processing of 384-channel or 1536-
channel microplates.
96X capillary maga-
zine:
Motion to positions A1 to B2 for 384 well operation
Motion to positions A1 to D4 for 1536 well operation
384X capillary maga-
zine:
Motion to positions A1 to B2 for 1536 well operation
Dispensing
Pos:1A1
Start
Exit
Changing tips
Dispensing
Pos:1A1
Start
Exit
Changing tips
Summary of Contents for Analytik Jena CyBio Well vario
