background image

HS 55 (Batch Mode)

Function and design

13

You can extend the functionality of the HS 55 and HS 60 Hg/hydride systems with the
following accessories and modules:

Module

Function

Hg cell ("tulip")

Tulip-shaped cell for higher sensitivity for Hg detection

Hg Plus Upgrade Modul

Enrichment of mercury on a gold collector for ultra-trace analy-
sis

HydrEA Upgrade Kit

Coupling of the Hg/hydride systems to the graphite tube AAS
for ultra-trace analysis of the hydride-forming elements and
mercury

An AS-GF autosampler must be used to supply the samples to
the AAS.

You can retrofit these accessories and modules yourself.

3.2

Design

The Hg/hydride system consists of a basic module, the functional module and an op-
tional module for mercury enrichment. The three modules are plugged on top of each
other and electrically connected through mixed plug connectors.

The Hg/hydride system can be used with the following AAS devices:

¡

ZEEnit 700 P, ZEEnit 700 Q, ZEEnit 650 P

¡

contrAA 800 series

¡

novAA 800 series, novAA 350i

For information on using the Hg/hydride systems with older Analytik Jena AAS models,
please contact customer service.

Detailed information on the design of the AAS devices and on the analysis process can
be found in the AAS device manuals.

Figure 1 Hg/hydride system with AAS device

Summary of Contents for analytikjena HS 55





















































Reviews: