HS 55 (Batch Mode)
Security
9
¡
Protective and safety equipment must never be removed, modified or switched
off during operation.
¡
Free access to the power switch on the right side panel must be ensured during
operation.
¡
Modifications, conversions and extensions to the device are only permitted after
consultation with Analytik Jena. Unauthorized modifications can jeopardize the
device’s operational safety and may lead to limitations regarding the warranty
and access to customer service.
¡
The ventilation equipment on the device must be in good working condition.
Covered ventilation grilles or slots etc. may cause the device to break down or
may cause damage to it.
¡
The cell unit becomes very hot during operation. Hot components must not be
touched during or directly after the operation of the device. The cooling times to
room temperature (at least 1 hour) must be observed.
¡
Keep flammable materials away from the cell unit.
¡
The gold collector (Hg Plus Upgrade Modul, optional) also becomes very hot dur-
ing operation. Only open the red device hood when the module has cooled
down.
¡
Caution when handling glass components. Risk of broken glass and therefore risk
of injury!
¡
During operation, there is a risk of crushing at the hose pump. Long hair and
baggy clothing can become caught in the pump and drawn in. Wear suitable hair
protections and tight-fitting clothing.
2.4.1
Safety instructions – protection against explosion and fire
The device may not be operated in an explosive environment.
Smoking or handling open flames are prohibited in the room in which the device is
operated!
2.4.2
Safety instructions – electrical equipment
Lethal voltages may occur in the device! Contact with live components may cause
death, serious injury or painful electrical shock.
¡
The power plug must be connected to a proper power outlet to ensure that the
device meets protection class I (ground connector). The device may only be con-
nected to power sources whose nominal voltage is the same as that on the rating
plate of the equipment. Do not replace the removable power cable of the device
with a power cable that does not meet the specifications (with no protective
ground conductor). Extensions of the supply cable are not permitted!
¡
The basic module and the system components may only be connected to the
mains when they are switched off.
¡
Electrical connection cables between the basic module and the system compo-
nents may only be connected or disconnected when the device is switched off.
¡
Before opening the device, the device must be switched off via the main switch
and the power plug must be disconnected from the power outlet!
¡
Work on the electronics may only be carried out by the customer service of Ana-
lytik Jena and specially authorized technicians.