3 Installation
ASP station 2000
64
EHauser
3.3
Installation conditions
Installation conditions
3.3.1
Dimensions
You can find the dimensions of the sampler in the Section “Mechanical construction” on
page 107.
3.3.2
Installation site
Fig. 3:
Notes on mounting the device
When mounting the device, please observe the following points:
❑
Position the device on a level surface.
❑
Protect the device against additional heat (e.g. radiators).
❑
Protect the device against mechanical vibration.
❑
Protect the device against strong magnetic fields.
❑
Ensure that air can circulate unhindered at the back of the cabinet. Do not position
the device directly against a wall (the distance between the wall and the rear side of
the cabinet should be at least 100 mm).
❑
Do not position the cabinet directly above the channel of the inflow to the wastewater
treatment plant (sulphurous vapours!).
