ASP Station 2000 RPS20B
Device description
Hauser
11
A
B
C
A0022653
A
Tap
B
Distribution pan
C
Bottle trays
3.5
Sample preservation
The sample bottles are located in the wet compartment of the sampler. The sample
compartment temperature can be set b2 and +20 °C (36 to 68 °F) directly at the
controller (factory setting: +4 °C (39 °F)). The current sample compartment temperature is
displayed at the controller. The evaporator and the defrost heater are embedded in the PU
insulation behind the inner lining to protect them against corrosion and damage. The
compressor and the condenser are located in the upper section of the sampler.
All parts that transport medium (e.g. distribution arm, dosing system, distribution pans) can
be disassembled and cleaned easily without the need for tools. The entire sample
compartment is fitted with a seamless plastic inner lining for easy and effective cleaning.
Bottle groups and distribution versions depending on the order version
RPS20B-****
B
1 x 30 l direct, PE
C
1 x 60 l direct, PE
E
12 x 3 l plate, PE
F
24 x 1 l plate, PE
H
24 x 1 l plate, glass
