Ecograph T, RSG35
Appendix
Hauser
139
Description
Determines whether the condition change from low to high or high to low is stored in the
event log.
Requires higher memory capacity.
Only visible if the result is = control input or state.
Options
No, Yes
Factory setting
Yes
Event message
Navigation
Expert → Application → Maths → Maths x → Event message
Direct access code: 400018-00x
Examples: Maths 1: 400018-000; Maths 4: 400018-003
Description
"Do not acknowledge": No message is shown if the state of the mathematics channel
changes.
"Acknowledge": A message window is shown on the screen which has to be acknowledged
by operating a push button.
Only visible if the result is = control input or state.
Options
Do not acknowledge, Acknowledge
Factory setting
Do not acknowledge
Event text L->H
Navigation
Expert → Application → Maths → Maths x → Event text L->H
Direct access code: 400011-00x
Examples: Maths 1: 400011-000; Maths 4: 400011-003
Description
Description of condition change from low to high. Event text is stored (e.g. Start filling).
Only visible if the result is = control input or state.
User entry
Text (max. 22 characters)
Event text H->L
Navigation
Expert → Application → Maths → Maths x → Event text H->L
Direct access code: 400012-00x
Examples: Maths 1: 400012-000; Maths 4: 400012-003
Description
Description of condition change from high to low. Event text is stored (e.g. Stop filling).
Only visible if the result is = control input or state.