Operation
Ecograph T, RSG35
38
Hauser
10
Operation
The "Operation" menu is geared towards the tasks and activities of the operator. It contains
all the parameters that are needed in ongoing operation. Historical values and analyses,
for example, can be displayed in the "Operation" menu and display settings can be made.
Any settings made for the onsite display have no effect on the measurement section or the
configured device parameters.
The unit's simple control system and the integrated help function enables you to perform
operation for many applications without the need for hard copy operating instructions.
10.1 Displaying and modifying current Ethernet settings
To establish communication with the device via Ethernet, the following settings must be
known or modified where necessary:
Display IP/MAC address
(only if DHCP is enabled): The device's IP or MAC address can be
found in the main menu under
"Diagnostics -> Device information -> Ethernet"
.
Display/change Ethernet settings:
The device's Ethernet settings can be found in the
main menu under
"Setup -> Advanced setup -> Communication -> Ethernet"
.
Procedure to establish a direct connection via Ethernet (point-to-point connection):
1. Configure the PC (depends on operating system): e.g. IP address: 192.168.1.1; subnet
mask: 255.255.255.0; gateway: 192.168.1.1
2. Disable DHCP on the device
3. Make communication settings on the device: e.g. IP address: 192.168.1.2; subnet
mask: 255.255.255.0; gateway: 192.168.1.1
A crossover cable is not required.
10.2 Reading the device locking status
If setup is locked via a control input, a padlock symbol appears on the top right of the
screen. The setup must first be unlocked via the control input before device parameters can
be edited.
Setup lock via control input:
The settings for the control input can be found in the main
menu under
"Setup -> Advanced setup -> Inputs -> Digital inputs -> Digital input X ->
Function: Control input; Action: Lock setup"
.
If setup is locked via the access code, all the operating parameters can be displayed, and
can also be edited as soon as the access code is entered.
