Ecograph T, RSG35
Technical data
Hauser
75
Operating elements
6
4
3
2
1
5
7
8
9
10
11
12
A0020602-EN
14
Front of device with open flap
Item
No.
Operating function (display mode = display of measured values)
(Setup mode = operating in the Setup menu)
1
"Navigator": jog/shuttle dial for operating with additional press/hold function.
In display mode: turn the dial to switch between the various signal groups. Press the dial to display the
main menu.
In setup mode or in a selection menu: turn the dial counterclockwise to move the bar or the cursor
upwards or to the left, changes the parameter. Turning clockwise moves the bar or cursor down or
clockwise, changes parameter.
2
LED at SD slot. Orange LED lights up or flashes when the device writes to or reads from the SD card.
Do not remove the SD card if the LED is lit or flashing! Risk of data loss!
3
Slot for SD card
4
USB B socket "Function" e.g. to connect to PC or laptop
5
Green LED lit: power supply present
6
USB A socket "Host" e.g. for USB memory stick or external keyboard
7
In display mode: alternating status display (e.g. set zoom range) of the analog or digital inputs in the
appropriate color of the channel.
In setup mode: different information can be displayed here depending on the display type.
8
In display mode: window for measured value display (e.g. curve display).
In setup mode: display of operating menu
9
In display mode: current group name, type of evaluation
In setup mode: name of the current operating item (dialog title)
10
In display mode: displays current date/time
In setup mode: --