Ecograph T, RSG35
Repairs
Hauser
59
Item No.
Description
Order No.
14
Motherboard
XPR0007-B1
18
Power supply 24 V AC/DC
XPR0007-B2
18
Power supply 100-230 V AC (+/-10%)
XPR0007-B3
17
Rear panel analog inputs
71165643
13
Terminals:
Terminal plug-in 3-pole for mains connection "N L PE" RM5.08 –
orange color
71123475
Terminal plug-in 3-pole FKC2.5/3-ST-5.08 for relay 1 (changeover)
71037408
Terminal plug-in 4-pole FKC2.5/4-ST-5.08 for relay 2+3
71037410
Terminal plug-in 6-pole FKC2.5/6-ST-5.08 for relay 4+5+6
71037411
Terminal plug-in 9-pole FMC1.5/9-ST-3.5 for digital inputs
71037363
Terminal plug-in 6-pole FMC1.5/6-ST-3.5 for analog input
51009211
Product structure for CPU with software
Item No.
Description
Order code
19
CPU + software
XPR0008-_ _ _ _
Operating language:
Universal
XPR0008-A1
Software:
Standard
Mathematics
XPR0008-A1A
XPR0008-A1B
Communication
Ethernet RJ45 + USB
RS232/485 + Ethernet RJ45 + USB
Modbus TCP slave + Ethernet RJ45 + USB
Modbus RTU/TCP slave + RS232/485 + Ethernet RJ45 + USB
XPR0008-A1_ A
XPR0008-A1_ B
XPR0008-A1_ C
XPR0008-A1_ D
Option:
Standard
Neutral
XPR0008-A1_ _ A
XPR0008-
Product structure for option retrofit
Item No.
Description
Order code
Option retrofit
(please enter the serial number)
XPR0009-_ _
Software:
Standard
Mathematics
XPR0009-A
XPR0009-B
Option:
Standard
Neutral
XPR0009-_ A
XPR0009-_ B
Standard
Modbus TCP slave (Modbus RTU only with RS485)
An RS485 interface is required for Modbus RTU. If there is no
RS485 in the device, a new CPU board must be ordered.
XPR0009-_ _ A
XPR0009-_ _ C
The software option can be enabled directly on the device. After ordering you will
receive instructions and a code that you must enter.