Incoming acceptance and product identification
FieldEdge SGC500
12
Hauser
4
Incoming acceptance and product identification
4.1
Incoming acceptance
• Check the packaging for visible damage arising from transportation.
• To avoid damage, remove the packaging with care.
• Keep all the accompanying documents.
The system must not be put into operation if the contents are found to be damaged
beforehand. Follow the instructions on
https://netilion.endress.com/legal/terms-of-service
.
Return the SGC500 when requested to do so by Hauser. Use the original packaging
where possible.
The device is replaced following consultation with Hauser and must only be
returned upon request.
4.1.1
Scope of delivery
The scope of delivery comprises:
• SGC500
• 1 × power terminal block connector
• 1 × fastening clip for DIN rail mounting
• 1 × dust protection cap
• 1 × documentation
4.2
Product identification
4.2.1
Nameplate
3
SGC500 nameplate
1
QR code with link to Netilion help
2
Hauser serial number
3
Hauser product name
4
MAC addresses of LAN connections
Do not use the LAN 2 MAC address, as this port is not used.
Summary of Contents for FieldEdge SGC500
Page 27: ......
