6 Configuring the Web Server
Fieldgate FXA720
34
Hauser
6.4
Security setup
Access rights to the Fieldgate are managed with the
"Security Setup"
function. As the
administrator, you can create and manage users here.
Caution!
• To avoid unauthorised access to the Fieldgate setup parameters, the administrator and
maintenance passwords should always be changed from the default settings!
• If you have updated from Version 1.00.21 to Version 1.01.00, see also Chapter 8, you will
need to set up a maintenance password.
Procedure
1 If not already selected, press
"Switch to Specialist Mode"
and log in as administrator.
2 Press
"Information & Configuration",
then
"Security Setup"
.
The Security Setup screen appears:
3 Enter the parameters you require in the screen – their significance is described in the table
below:
– Administrator rights allow access to all Fieldgate setup parameters.
– Maintenance rights allow access to all Fieldgate setup parameters except security
– Executive rights allow access for viewing parameters only.
A full description of roles and rights is to be found in Table 6-1 in Section 6.1.
4 Press
"Send"
to download the security parameters to the Fieldgate.
Security parameters
Table 6-5: Significance of Security Setup parameters
Parameter
Description
User Name
Fixed by default: admin, exec or maint respectively
New Password
Enter your new password here.
Retype New
Password
Enter your new password again to confirm the change.
Summary of Contents for Fieldgate FXA720
