Fieldgate SFG500
FieldCare
Hauser
13
4.1.4
Scan for Fieldgate SFG500
1. Right-click on the
SFGNetwork
node and select
Connect
to put the CommDTM online
– The Connection arrows turn green
2. Right-click on the
SFC500 Network
node and select
Create Network
3. FieldCare searches for any SFG500s in the Ethernet network and adds them to the
network view
4. If only one is found, it connects and opens the SFG500 CommDTM
5. If no DTM is found, it is possible that the UDP ports are blocked
– Either unblock as described in Appendix B (you will need administrator rights)
– Or add the CommDTM manually (right-click on SFG500 Network node,
Add Device
)
and configure it by hand, see Chapter 5.1