Commissioning
FieldGate SWG50
36
Hauser
8.2.2
Special commands
The FieldGate SWG50 supports the activation of Fast Pipes for block data transfer using the
following commands:
CMD 146 (Write Device Fast Pipe Status)
Byte(s) Value
Request
0-4 5-byte Device Unique ID
5 Pipe Status (OFF, ON_BI, ON_UP, ON_DOWN)
Byte(s) Value
Response
0-4 5-byte Device Unique ID
5 Pipe Status (OFF, ON_BI, ON_UP, ON_DOWN)
CMD 147 (Get Device ID of Active Pipe)
Byte(s) Value
Request
None
Response
0-4 5-byte Device Unique ID
CMD 147 (Get Device ID of Active Pipe)
Byte(s) Value
Request
None
Response
0-4 5-byte Device Unique ID
CMD 148 (Write Device Routing Status)
Byte(s) Value
Request
0-4 5-byte Device Unique ID
5 Routing Status (Enable/Disable)
Response
0-4 5-byte Device Unique ID
5 Routing Status (Enable/Disable)
9
Commissioning
9.1
Function check
• Post-connection check
9.2
Configuring the device
1. Connect the device to the network.
Summary of Contents for FieldGate SWG50
