background image

Field Xpert

1 Safety

Hauser

3

1

Safety

1.1

Designated use

Field Xpert is an industrial PDA with integrated 3.5" touchscreen based on Windows Mobile. It 
offers wireless communication via the optional VIATOR Bluetooth modem as a point-to-point 
connection to a HART device or via WiFi and a Fieldgate FXA520 from Hauser to one or 
more HART devices. Field Xpert also works as a standalone device for asset management 
applications. It may be used only for the purposes described in these Operating Instructions and only 
in conjunction with third-party devices and components recommended or approved by 
Hauser.

1.2

Commissioning and operation

Field Xpert must be connected, operated and maintained in accordance with the instructions in this 
manual. Personnel must be authorized and have the necessary qualifications.

To ensure that the product operates correctly and safely, it must be transported, stored and installed 
in the correct manner, and care must be taken when operating and maintaining it.

1.3

Operational safety

Operating environments

Field Xpert meets the requirements of the EU guidelines for the different operating environments in 
which it is designed to operate. The permitted operating conditions, as described in the technical 
data, must be observed.

Hazardous areas

The following hazardous areas must be respected:

•  Field Xpert non-ex version for operation outside hazardous areas
•  Field Xpert Ex ATEX for operation in hazardous areas zone 1
•  Field Xpert Ex FM for operation in hazardous areas zone 1
•  VIATOR Bluetooth modem for operation in hazardous areas zone 1
•  The VIATOR Bluetooth modem is ATEX, FM and IS certified.

Repair

Do not open the Field Xpert housing. It does not contain any parts which the user needs to service 
or repair. In the event of a fault or defect, please return the device to Hauser. Opening the 
device invalidates the guarantee and Ex approval. The VIATOR Bluetooth modem may be opened 
in order to replace the batteries, as described in this manual.

1.4

Declaration of conformity

A CE declaration of conformity has been issued for the Ex and non-Ex versions.
The relevant documents can be found here:

•  Hauser CD-ROM (folder: Field Xpert/Confirmations)

1.5

Technical improvement

Hauser reserves the right to make technical improvements to the hardware and software 
at any time and without prior notification. If such improvements do not affect the operation of the 
device, they are not documented. If the improvements affect operation, a new version of the 
Operating Instructions will be issued.

Summary of Contents for HART Field Xpert









































Reviews: