Proline Promag 51
Operation
Hauser
43
General notes
The Quick Setup menu (
53) is adequate for commissioning in most instances. Complex
measuring operations on the other hand necessitate additional functions that you can configure as
necessary and customize to suit your process parameters. The function matrix, therefore, comprises
a multiplicity of additional functions which, for the sake of clarity, are arranged in a number of
function groups.
Comply with the following instructions when configuring functions:
• You select functions as described on
53.
• You can switch off certain functions (OFF). If you do so, related functions in other function groups
will no longer be displayed.
• Certain functions prompt you to confirm your data entries.
Press
P
to select "SURE [ YES ]" and press
F
again to confirm. This saves your setting or starts a
function, as applicable.
• Return to the HOME position is automatic if no key is pressed for 5 minutes.
!
Note!
• The transmitter continues to measure while data entry is in progress, i.e. the current measured
values are output via the signal outputs in the normal way.
• If the power supply fails, all preset and parameterized values remain safely stored in the EEPROM.
"
Caution!
All functions are described in detail, including the function matrix itself, in the "Description of
Device Functions" manual, which is a separate part of these Operating Instructions.
