ISEmax compressed air cleaning unit (230 V AC)
Maintenance
Hauser
15
8.2
Maintenance tasks
8.2.1
Checking compressed air supply to sensor
If cleaning unit is switched on:
1. Check if air is escaping from the cleaning nozzle on the sensor.
2. If not, and if air is instead escaping only via the safety valve on the cleaning unit:
Check the complete supply line to the cleaning nozzle and check the nozzle itself for
contamination and blockage.
3. Remove the contamination.
If this is not possible: Replace blocked hoses, connectors or nozzles.
Summary of Contents for ISEmax compressed air cleaning unit
