Installation
Levelflex M FMP43 with PROFIBUS PA
22
Hauser
3.3.6
Turning the housing
After mounting, the housing can be turned 350° in order to ease access to the display and the
terminal compartment. Proceed as follows to turn the housing to the required position:
• Undo the fixing screw (1)
• Turn the housing (2) in the required direction
• Tighten the fixing screw (1).
L00-FMP41Cxx-17-00-00-en-002
3.4
Post-installation check
After the measuring device has been installed, perform the following checks:
• Is the device damaged (visual inspection)?
• Does the device correspond to specifications at the measuring point, including process
temperature and pressure, ambient temperature, measuring range, etc.?
• Are the measuring point number and labeling correct (visual inspection)?
• Is the device adequately protected against rain and direct sunlight (
78)?
90°
90°
90°
90°
90°
90°
1
1
2
2
F12/F23 housing
T12 housing
allen key
4 mm/0.1”
Summary of Contents for Levelflex M FMP43
Page 4: ...Brief overview Levelflex M FMP43 with PROFIBUS PA 4 Endress Hauser...
Page 104: ...Appendix Levelflex M FMP43 with PROFIBUS PA 104 Endress Hauser...
Page 106: ...Levelflex M FMP43 with PROFIBUS PA Index 106 Endress Hauser...
Page 108: ...www endress com worldwide BA358F 00 en 07 07 No 71041163 CCS FM SGML 6 0 ProMoDo 71041163...