Operation
Levelflex M FMP43 with PROFIBUS PA
34
Hauser
5.2.2
Display symbols
The following table describes the symbols that appear on the liquid crystal display:
5.2.3
Key assignment
The operating elements are located inside the housing and are accessible for operation by opening
the lid of the housing.
Function of the keys
Symbol
Meaning
ALARM_SYMBOL
This alarm symbol appears when the device is in an alarm condition. If the symbol flashes, this indicates a
warning.
LOCK_SYMBOL
This lock symbol appears when the device is locked, i.e. if no entries are possible.
COM_SYMBOL
This communication symbol appears when data are being transmitted e.g. via HART, PROFIBUS PA or
FOUNDATION Fieldbus.
Key(s)
Meaning
O
or
V
Navigate upwards in the selection list
Edit numeric value within a function
S
or
W
Navigate downwards in the selection list
Edit numeric value within a function
X
or
Z
Navigate to the left within a function group
F
Navigate to the right within a function group, confirmation
O
and
F
or
S
and
F
Contrast settings of the LCD
O
and
S
and
F
Hardware locking/unlocking
After hardware locking, operation via display and communication is not possible!
The hardware can only be unlocked via the display. A release code must be entered for this
purpose.
Summary of Contents for Levelflex M FMP43
Page 4: ...Brief overview Levelflex M FMP43 with PROFIBUS PA 4 Endress Hauser...
Page 104: ...Appendix Levelflex M FMP43 with PROFIBUS PA 104 Endress Hauser...
Page 106: ...Levelflex M FMP43 with PROFIBUS PA Index 106 Endress Hauser...
Page 108: ...www endress com worldwide BA358F 00 en 07 07 No 71041163 CCS FM SGML 6 0 ProMoDo 71041163...