Micropilot FMR56, FMR57 FOUNDATION Fieldbus
Operating menu
Hauser
171
"Administration" submenu
Navigation
Setup → Advanced setup → Administration
Define access code
Navigation
Setup → Advanced setup → Administration → Def. access code
Description
Define release code for write access to parameters.
User entry
0 to 9
999
Factory setting
0
Additional information
If the factory setting is not changed or 0 is defined as the access code, the parameters
are not write-protected and the configuration data of the device can then always be
modified. The user is logged on in the
Maintenance
role.
The write protection affects all parameters marked with the symbol in this
document. On the local display, the symbol in front of a parameter indicates that
the parameter is write-protected.
Once the access code has been defined, write-protected parameters can only be
modified if the access code is entered in the
Enter access code
parameter
(→ 138).
Please contact your Hauser Sales Center if you lose your access code.
For display operation: The new access code is only valid after it has been confirmed in
the
Confirm access code
parameter (→ 173).
Device reset
Navigation
Setup → Advanced setup → Administration → Device reset
Description
Select to which state the device is to be reset.
Selection
• Cancel
• To fieldbus defaults
• To factory defaults
• To delivery settings
• Of customer settings
• To transducer defaults
• Restart device
Factory setting
Cancel
Summary of Contents for Micropilot FMR56
Page 197: ......
Page 198: ...www addresses endress com 71344036 71344036 ...
