Mounting
Micropilot FMR51, FMR57
4
3
Mounting
3.1
Mounting preparations
The following tools are necessary for mounting: Hexagon spanner size 3
3.2
Mounting steps
1
2
3
4
5
6
7
8
A0019145
1
Mounting horn protection
1
Flat seal
2
Lock washer
3
Screws, antenna socket
4
Holding ring
5
Contact ring
6
O-ring seal
7
Horn protection
8
Screws, horn protection
1. Loosen the screws (3) on the antenna socket and remove horn antenne.
2. Shift O-ring seal (6), contack ring (5) and holding ring (4) onto the antenna cone.
3. Plug horn protection (7) onto the antenna opening and direct the holes to the
holding ring (4).
4. Tighten the screws (8) crosswise until the horn protection (7) and holding ring (4)
are assembled.
5. Insert flat seal (1) between horn antenna and antenna socket.
6. Retighten the horn antenna with screws (3) to the antenna socket; Max. torque
2.5 Nm (1.844 lbf ft).
Summary of Contents for Micropilot FMR57
Page 7: ......
