Micropilot FWR30
Operation options
Hauser
13
7
Operation options
7.1
Overview of operation options
7.1.1
Operation via activation switch on device
The activation switch is locked while an activity is being performed and until the
activity has been completed.
LED light test
• The LED light test is triggered by pressing briefly on the activation switch three times
within 2 seconds.
• The LED flashes alternately red and green for 6 seconds.
Cloud transmission
• Pressing briefly (<7 seconds) on the activation switch triggers a cloud transmission.
• The green LED flashes during transmission.
• If the transmission is successful, the green LED lights up for 10 seconds and then turns
off.
• If the transmission fails, the red LED flashes for 10 seconds and then turns off.
Cloud transmission and simultaneous deactivation of the FWR30
• Pressing longer (>7 seconds) on the activation switch triggers a cloud transmission and
disables the device.
• The green LED flashes during transmission.
• If the transmission is successful, the green LED flashes for 2 seconds, stays green for 2
seconds and then turns off.
• If the transmission fails, the red LED flashes for 10 seconds and then turns off.
7.1.2
Operation via cloud and app
The measuring device is operated via Netilion Value.
[QR code under development]
