Operation
Micropilot M FMR 240 with Foundation Fieldbus
52
E Hauser
Block administration parameters
Output values
Parameter
Description
MODE_BLK
See description in Resource block. The possible operating modes of the transducer block
are:
– AUTO: the block is operating as normal
– MAN: the block is operated with a manually entered primary value.
– OOS: the block is out of service.
TAG_DESC
User description of the intended application of the block.
BLOCK_ERROR
Shows error status of software and hardware components
– Out-of-Service: the block is in OOS mode
– Simulation active: shows the setting of DIP-switch SIM. Input failure/process variable
has BAD status.
– configuration error
Parameter
Description
PV
Either the primary/secondary transducer block value used to execute the block or a pro-
cess value associated with it. Comprises value and status.
OUT
The primary value output as a result of executing the analog input block. Comprises
value and status.
FIELD_VALUE
Raw value of field device in % of PV range with a status reflecting the transducer condi-
tion before signal characterisation L_Type or filtering V_TIME. Comprises value and sta-
tus.
