Brief operating instructions
Proline Promass 83 FOUNDATION Fieldbus
2
Hauser
Brief operating instructions
These brief operating instructions show you how to configure your measuring device quickly and
easily:
!
Note!
Always start trouble-shooting with the checklist on Page 69, if faults occur after
commissioning or during operation. The routine takes you directly to the cause of the problem and
the appropriate remedial measures.
Safety instructions
▼
Installation
▼
Wiring
▼
Operation at a glance
▼
Basic Configuration (Device Parameters, Automation Functions)
Configuration programs from various manufacturers can be used to configure device-specific
parameters and to specify automation functions for the FOUNDATION Fieldbus.
!
Note!
If the measuring device is equipped with a local display, device-specific parameters and
functions can be configured easily and quickly using the “Commissioning” Quick Setup
menu, e.g. language of the UI, measured variables, engineering units, signal types, settings
for measuring operation with gas, etc.
→
see next page.
▼
Customer specific configuration
Complex measurement tasks require additional functions to be configured that the user can
individually select, set and adapt to his process conditions by setting the appropriate param-
eters. You have two options:
– Parameterization using the configuration program (FOUNDATION Fieldbus)
– Parameterization using the local display (optional)
!
Note!
All functions and device parameters are described in detail in the
“Description of Device
Functions”
manual, which is a separate part of these Operating Instructions.
▼
Data storage
The configuration of the transmitter can be stored on the integrated T-DAT data storage
device.
!
Note!
For time-saving commissioning, the settings stored in the T-DAT can be transmitted:
– For equivalent measuring points (equivalent configuration,)
– In the event of device/board replacement.
Summary of Contents for Proline Promass 83
