Prosonic S FDU90/91/91F/92/93/95/96
10
Hauser
Installation
Installation options
(Examples)
L00-FDU9xxxx-17-00-00-xx-001
1
FAU40
2
Zone 20
3
Zone 21
A:
at girder or angle bracket,
B:
with alignment unit FAU40, in ATEX Zone 20 the alignment unit can be used for zone
separation,
C:
with a 1" sleeve welded to a grating
L00-FDU9xxxx-17-00-00-xx-007
1
FDU9x
A:
Installation with cantilever and wall bracket,
B:
Installation with cantilever and mounting frame,
C:
The cantilever can
be turned in order to position the sensor over the centre of the flume.
Cantilever, wall bracket and mounting frame are available as accessories (
31).
L00-FDU90xxxx-17-00-00-xx-001
A:
FDU90: Ceiling mounting
B:
FDU90: Mounted at front thread (G 1½" or NPT 1½" )
C:
FDU9x: Mounted at rear thread (G 1" or NPT 1")
D:
FDU90, FDU91, FDU92: Mounting with G 1" counter nut
1)
Caution!
• The cable of the sensors is not designed as a supporting cable. Do not use it as a suspension wire.
• The sensor membrane is part of the measuring system and must not be damaged during installation.
A
B
C
-
-
.
3
2
1
A
B
C
1
1
A
B
C
D
41 mm
1)
The counter nut with gasket is supplied for the sensors FDU90, FDU91 and FDU92 with a metric thread G 1" at the process connection.
