Commissioning
Teqwave H
52
Hauser
Parameters
Procedure
Selection/input
Factory setting
App
To prevent an unauthorized
concentration app change, enter the
password and enable the function.
When you tap the
Password
button
the text editor opens where you can
enter the password. Tap the
Activate / Deactivate
button to
activate or deactivate the password.
To protect the entire system
from being used and
modified, activate the display
lock under Settings → User
settings → Screensaver →
Display turn off → Lock
display.
• 4-digit character string or
numerical sequence
• Enable/disable the function
LSC2
Settings
To protect access to the settings
(apart from the
Select
concentration app
function), enter
the password and enable the
function. When you tap the
Password
button the text editor
opens where you can enter the
password. Tap the
Activate /
Deactivate
button to activate or
deactivate the password.
To protect the entire system
from being used and
modified, activate the display
lock under Settings → User
settings → Screensaver →
Display turn off → Lock
display.
• 4-digit character string or
numerical sequence
• Enable/disable the function
LSC2
10.4.9 Configuring the failure mode
The menus
Diagnosis
(transmitter with touch screen) and
View filter
(Viewer) contain
functions to define how the device behaves when limit values are breached (under/over
range). In addition, they also contain settings for the evaluation of the measurement
results that are shown on the transmitter display.
Navigation using transmitter with touch screen
1. Settings menu → "Application parameters" → "Diagnosis" → "View options"
2. Settings menu → "Application parameters" → "Diagnosis" → "Change in → Select
measured variable
3. Settings menu → "Application parameters" → "Diagnosis" → "Process disturbance" →
"Switch point"
Navigation using the Viewer
1. Menu "Teqwave Transmitter" → View filter" → "Filter options" and "Filter arrangements"
2. Menu "Teqwave Transmitter" → "View filter" → "Change in" → Select measured variable
3. Menu "Teqwave Transmitter" → "View filter" → "Process disturbance" → "Switch point"