Commissioning
Teqwave H
56
Hauser
Parameter overview with brief description
Parameter/function
Procedure
Selection/input
Factory setting
Compensation value K1…K4
Enter the compensation value as a
constant value:
In the selection field, select the
"Fixed value" option and enter the
value for the compensation value.
Observe the calibration range limits
→ 46 when doing so.
To enter the compensation
values, the user can open the
conversion tool by clicking the
button of the same name.
Read the compensation value into
the measuring device via Modbus
TCP:
Select the "Modbus [register
address]" option in the selection
field.
User entry:
Positive decimal
Options:
• "Disabled": compensation value is
not taken into consideration.
• "Fixed value": the compensation
value entered is used.
• "Modbus [register address]": the
compensation value received via
Modbus TCP is taken into
consideration.
User entry:
0.00
Options:
Disabled
Adding a recipe to the transmitter
Recipes which the customer has created using the recipe generator can be added to, or
removed from, the transmitter with the "Manage concentration apps" function.
‣
Manage concentration apps → 65.
10.5.2 Setting the compensation values
The compensation values available for a concentration app can be configured manually via
the
Select concentration app
menu (transmitter with touch screen). To use compensation
values permanently in a recipe and for further information on the compensation values,
see the recipe generator → 54.
Navigation using transmitter with touch screen
Settings menu → "Select concentration app" → Select concentration app or recipe →
"Compensation values" → Select compensation value
The
Compensation value
function can only be accessed if the concentration app was
activated beforehand with the
Activate application
function.
Compensation values are only available if they were provided in the data record of the
concentration app upon delivery.
