Operation
Teqwave H
66
Hauser
transmitter and activate them, and remove concentration apps that are no longer needed
from the transmitter.
Concentration apps which the customer has preset using the recipe generator - which
are known as recipes - can also be added to, or removed from, the transmitter with
the
Manage concentration apps
function. For more information on the recipe
11.8.1 Adding a concentration app to the transmitter
Concentration apps are individually tailored to a specific measuring device and can
only be used with this particular device. The system uses a serial number saved in the
concentration app file to automatically check whether there is authorization to enable
the concentration app on the connected transmitter.
1. Open the "Teqwave Transmitter" → "Manage concentration apps" menu.
A new window appears.
2. Click the "Add" button.
The "Enter path of file(s)" window appears.
3. Select the concentration app file. Concentration app files are lmf format.
Concentration apps preset by the customer, which are known as recipes, are in rcp
format.
4. Click the "OK" button to add a new concentration app or recipe to the transmitter.
11.8.2 Deleting a concentration app from the transmitter
• If an active concentration app is deleted, a new concentration app must then be
activated. Otherwise the system stops calculating the concentration of the liquid.
• If concentration apps that have been deleted from the transmitter are to be used
again, they must be added to the transmitter again from the CD-ROM.
1. Open the "Teqwave Transmitter" → "Manage concentration apps" menu.
A new window appears.
2. Select the concentration app to be deleted from the "Concentration apps" drop-down
menu.
3. Click the "Delete" button.
The message "Do you really want to delete the data?" appears on the screen.
4. Select "Yes" to confirm.
The Viewer removes the concentration app from the transmitter.
11.9 Replacing the transmitter
Establishing a connection → 34.
11.10 Updating the firmware
Firmware updates must be installed via the Viewer. They are available in the Download
Area of the Hauser website:
→ Downloads.
Specify the following details:
• Search area: "Software"
• Software type: "Device driver" and "Firmware Flash File"
Navigation
Menu "Teqwave Transmitter" → "Update Transmitter"