WirelessHART Fieldgate SWG70
Additional Functions
E Hauser
105
11.4
Change Password (Web Server)
Password allows the password to the Web Server to be changed.
1. Click
Additional Functions> Change Password
to open the dialog:
2. Enter the new password in the two fields provided.
3. Press the
Change Password >>
button to download the new password.
4. The action can be canceled immediately after entering the new password if the Discard
Operation >>
button is pressed.
11.5
Set DTM Addresses (DTM)
Set DTM Addresses
allows the user to match the addressing in the DTM, i.e. the Long Tag
in WirelessHART networks, to the physical devices. Any change must also be duplicated in
the
Set Device Addresses
window (see Chapter 8.6.7), otherwise the DTM is not able to
establish a connection to the adapter. See Chapter 11.6 "Set Device Addresses (DTM)" on
page 106. Changes should be made only after all adapter DTMs have been closed. The func-
tion is not relevant to FieldCare but might be required for other FDT frames.
1. Click
Additional Functions => Set DTM Addresses
to open the dialog:
To change the
DTM address:
2. Place the cursor inside a cell of the
Long Tag
column.
3. Change the device long tag as required. You may change the long tags of several devices
at once, if needed.
4. Close any DTM dialogs of the devices whose long tags are to be changed.
5. To apply the new DTM address(es) press
Update Changed Tags.
6. The new DTM addresses are displayed in the project view of FieldCare.
