42
Commissioning
Connect a consumer to the power generator as follows:
Conditions
The generator is started and brought up to operating temperature (see Chap-
ter 7.3 ).
All power consuming equipment is disconnected or switched off.
All circuit breakers in the fusebox are in “ON” position.
The control module’s green control LED goes on.
The sockets and connected consumers are supplied with voltage.
Connecting con-
sumers
1. Turn the locking ring on the socket’s splash guard anti-clockwise to the stop.
2. Fold the splash guard aside with one hand.
3. Use your other hand to insert the plug from the consumer to be connected
into the socket to the stop.
4. Firmly screw the locking ring clockwise on the consumer’s plug.
The consumer is connected to the power generator and ready to use.
NOTICE!
If the control module display shows the home screen (also see Chapter 8.1
), you can read the power of the operated consumers from the representa-
tion.
