background image

   

5

B e f o r e   Y o u   B e g i n

  

  

Retain this Owner’s Manual for future reference!

To maximize your use of the equipment please study this Owner’s Manual thoroughly. Please retain this 

manual for future reference or parts information. 

Thank you for purchasing the ESB150. 

This Fitness Exercise Bike is part of the Endurance 
line of quality cardio machines, which let you target 
specific muscle groups to achieve better muscle tone 
and overall body conditioning. 

Unpacking the Equipment

The ESB150 is carefully tested and inspected before 
shipment. We have shipped the unit in several pieces 
that require assembly. Ask for assistance during the 
assembly process. Carefully unpack the boxes and lay 
the pieces on the floor near the area where you plan 
to use the equipment.

The ESB150 is designed for your enjoyment. By fol-
lowing these precautions and using common sense, 
you will have many safe and pleasurable hours of 
healthful exercise with your Endurance ESB150.

After assembly, you should check all functions to en-
sure correct operation. If you experience problems,  
or if any items are missing, first recheck the assembly 
instructions to locate any possible errors made dur-
ing assembly. If you are unable to correct the prob-
lem, call the dealer from whom you purchased the 
machine or call 1-800-556-3113 for the dealer near-
est you. 

Obtaining Service

Please use this Owner’s Manual to make sure that all 
parts have been included in your shipment. When 
ordering parts, you must use the part number and 
description from this Owner’s Manual. Use only En-
durance replacement parts when servicing this unit. 
Failure to do so will void your warranty and could re-
sult in personal injury.

For information about product operation or service, 
check out the official Endurance website at www.
bodysolid.com or contact an authorized Endurance 
dealer or an Endurance factory-authorized service 
company or contact Endurance customer service, 

M-F 

8:30am-5:00pm CST

, at one of the following:

 

*

 

Toll  Free: 

 (800) 556-3113

 

 

Local:   (708) 427-3555

 

 

Fax: 

 (708) 427-3556

 

:

 

E-mail:   service@bodysolid.com

or write to:

 

+

 

Endurance

  Service 

Department

 

 

1900 S. Des Plaines Ave.

 

 

Forest Park, IL 60130  USA

Endurance continually seeks ways to improve the performance, specifications and product manuals in order to ensure that only superior products are re-

leased from our factories. Please take the time to carefully read through this manual thoroughly. Instructions contained in this document are not intended 

to cover all details or variations possible with Endurance equipment, or to cover every contingency that may be met in conjunction with installation, 

operation, maintenance or troubleshooting of the equipment. Even though we have prepared this manual with extreme care, neither the publisher nor the 

author can accept responsibility for any errors in, or omission from, the information given. Should additional information be required, or should situations 

arise that are not covered by this manual, the matter should be directed to your local Endurance representative, or the Service Department at Endurance 

in Forest Park, Illinois.

Any Questions?

 Call  (800) 556-3113

Summary of Contents for ESB150































Reviews: