12
Clean Boss™ Pro
English
TROUBLESHOOTING
CONDITION
CAUSE
REMEDY
Pump will not
prime
1)
Insufficient motor
RPM
2)
Air leak on suction
plumbing
3)
Blocked/Restricted
intake hose
4)
Filter cap disengaged
5)
Filter gasket
damaged/missing
1)
Increase motor RPM
until pump primes
2)
Tighten/replace
fittings & hose clamps.
Verify suction hoses are
in good condition
3)
Remove blockage
from suction line,
ensure line is not
kinked
4)
Lock filter cap into
position
5)
Replace filter gasket
Pressure drops/
fluctuates during
standard
operation
1)
Restriction on suction
line
2)
Pump sucking air
3)
Plugged filter
4)
Damaged regulator
1)
Inspect tank and
suction lines and
remove restriction
2)
Tighten fittings
3)
Remove and clean
filter mesh and housing
4)
Remove regulator
stem and inspect for
broken parts/pieces
Pressure gauge
not registering
1)
Plugged with debris
1)
Unthread, check and
clean pressure gauge