10
Field Boss™ EcoLite
English
1)
To install boom brackets to the spray-
er, insert the 3/8” x 1” bolts through the
bracket and place plastic washers over
bolts to hold them in place.
2)
Connect the brackets by sliding the
3/8” x 1” bolts through the C-bracket on
unit and install 3/8” washer and 3/8” lock
nuts loosely.
Mounting Your Boom
3)
To install your boom to the brackets,
loosen the carriage bolts on the boom
(leaving nuts and washers on bolts).
Align carriage bolts with quick attach
brackets and slide them into the brack-
et slots, then lower the boom down to
desired height.
4)
When the boom is set to desired
height, tighten the hardware, making
sure the square neck on the carriage
bolt is fully inserted through the slot.
GETTING STARTED
