16
Field Boss™ EcoLite
English
CALIBRATING
1) Measure Nozzle Spacing
Measure the distance between each
nozzle to determine the length of your
travel distance.
Nozzle spacing = Distance to travel
(16” = 255’) (18” = 227’) (20” = 204’)
(22” = 185’) (24” = 170’)
2) Measure Appropriate Travel Distance
Mark the distance with flags or between
fence posts. A tape measure capable of
measuring farther than 200 ft. will make
this step easier.
3) Drive Measured Distance - Timed
Driving the sprayer at the intended
spraying speed, time how long it takes
to travel between the marked distance.
Repeat this procedure and average the
two measurements.
4) Set Correct Spraying Pressure
With the sprayer parked and the pump
running, set the ideal or intended
pressure.
*Distances shown with 110° nozzles
