Eneo PLS-5304, Full Manual

Part 2 - Remote Setup

18

Date/Time

 •

Date/Time

: Change the video encoder's date/time 

settings and display formats and configure the time 
zone and daylight saving time settings. Click 

Apply

 to 

apply the changes right away.

 •

Time Sync

 -

Automatic Sync

: Select to synchronize the system's 

time with the time server at a specified interval. 
Enter the time server's IP address or domain name 
and then specify the interval. If the time server 
is 

FEN

-enabled, select the 

Use FEN

 option and 

then enter the time server's name instead of its IP 
address or domain name.

 -

Run as Server

: Select to run the video encoder 

as a time server. Other devices will then be able 
to synchronize its time setting with this video 
encoder's time setting.

If you wish to enter a domain name instead of an 
IP address for the 

Time Server

 setting, DNS server 

must be configured during 

Network

 setup. If you 

wish to enter a server name instead of an IP address 
or a domain name, the 

Use FEN

 option must be 

enabled during 

Network

 setup.

User/Group

 •

User/Group

: Change remote video encoder control 

permission settings for users and user groups.

 -

Add Group

: Add a new user group. Designate 

a name for the group and then specify control 
authorities.

 -

Add User

: Add a new user. Designate a name for 

the user, select which group to add the user to, and 
then enter a connection password.

 -

Edit

: Edit group authorities and/or user passwords. 

Select a group or user and then click on the button.

 -

Remove

: Delete groups or users. Select a group 

of user you wish to delete and then click on the 
button.

 •

User/Group

 settings can only be configured by 

users belonging to the 

Administrator

 group.

 • There is no default password for the 

Administrator

group's 

admin

 user.

 • Group authorities that can be assigned are as 

follows:

–

Upgrade

: Upgrade the system.

–

Setup

: Configure the system's settings. 

–

Color Control

: Adjust the camera's brightness, 

contrast, saturation, and hue settings.

–

PTZ Control

: Allows you to control the zoom of 

the lens.

–

System Check

: View system event status.