11
EN
Operating instructions
Using OSD controller
Setup menu can be accessed and controlled by OSD control joy stick on the gimbal of the
camera unit. Five commands are available with the joy stick.
CAUTION:
Extreme care should be taken NOT to apply force to
the IR LEDs.
Description of the joystick operation
1. SET Key (
●
) : Access to the menu or enter the setting. To enter the main menu,
press the Set Key down for about 1.5sec
2. UP/DOWN Key (
▲
/
▼
) : Choose the desired sub-menu and to move the cursor up or
down.
3. LEFT/RIGHT Key (
◄
/
►
) : Set up the value of the selected menu. Used to adjust the
desired menu selection and to move the cursor left or right.
4. ‘
☟
’ denotes the long press down straightly for about 2 seconds
Description of the D-ZOOM adjustment
i
Works only when OSD Menu is inactive. Set to pointing zoom ON for D-Zoom
control.
1.
▲
: Zoom In
2.
▼
: Zoom Out
OSD control Joy Stick
IR-LEDs
