ML0071-601-06 Super Seal™ Operations Manual Rev. A
ENERCON INDUSTRIES
44
SECTION 7 – PARTS LISTS
GENERAL
This Section of your manual contains illustrated part
breakdowns of the various components that make up
the
Super Seal™
Induction Cap Sealing System. If
standard options are offered with your system they
will be represented with parts breakdown illustrations
as well, but special order options typically will not.
The illustrations, and their associated part tables, are
primarily provided for replacement part identification,
but can also be useful in locating items that are
identified as being required for operation, or requiring
maintenance or adjustment.
HOW TO USE THE PART LISTS
1. Refer to the illustrated part breakdowns to
identify the desired illustration.
2.
Visually locate the desired part in the
illustration and identify the parts
Item #
.
3. Refer to the part table and find the
Item #
to
identify the Enercon
Part #
,
Description
, and
Quantity
.
HOW TO ORDER PARTS
Due to possible
changes in the part numbers and
quantities in your system, we request that you have
all of the following information available when placing
an order. We do understand that some information
may be unavailable, but be aware that this may
cause delays in shipping your order.
1. Locate the
Model Number
and
Serial Number
of
your unit on the system
Rating Plate
; see
Figure
4
on
Page 6
of this manual.
2. The
Part Number
and
Date
of this manual; both
are located on front cover of this manual. The
Part Number
is also located in the footers on
each page of the manual.
3. The
Part Number
of the desired part, the page
number it was found on, and the parts
Description
.
NOTE:
All of the replacement parts provided are
manufactured with the same precision as the parts
supplied with the original equipment.
4. To place a part order contact:
Enercon Parts Department
Phone Number: (262) 255-6070
Fax Number: (262) 255-2462
E-Mail Address: parts@enerconmail.com
SHIPPING INSTRUCTIONS FOR RETURNS
Enercon has 2 facilities that perform repairs and
process credits. Before shipping parts or equipment
back, contact Enercon’s Customer Service
Department for a
Return Material Authorization
(RMA)
number, the proper shipping address, and
any special shipping instructions.
If possible, use the original packaging material the
parts or equipment were shipped with. If that is not
available, use a fiberboard box and adequate
packing materials to support the item’s weight and
prevent movement during shipping.
Ensure both the shipper and receiver addresses are
clearly printed on top of package along with the
RMA
number.
Parts must be sent
Prepaid
.
