13
EG-PMS-LANU ENERGENIE PROGRAMMABLE POWER
STRIP WITH LAN INTERFACE
All brands and logos are registered trademarks of their respective owners
Press
IP Config (C)
button on the side control panel (see Figure #1
above) with the tip of a pen
While holding it pressed, press and release
Reset
(A) button and
wait for about 3 seconds until you hear the sockets switching twice
The above-mentioned procedure forces EG-PMS-LANU to reset
itself to the default settings (see below) ...
IP: 192.168.0.254
Subnet mask: 255.255.255.0
Gateway: 192.168.0.1
DNS:0.0.0.0
DHCP: enabled
IP filtering: disabled
Power Manager client port: 5000
... EG-PMS-LANU then searches for an IP address from your
eventual DHCP server. If no DHCP server is found within 1 minute,
EG-PMS-LANU will then automatically revert to the default settings (see
above, with IP: 192.168.0.254).