15
EG-PMS-LANU ENERGENIE PROGRAMMABLE POWER
STRIP WITH LAN INTERFACE
All brands and logos are registered trademarks of their respective owners
3.4. IP configuration
The utility
Find EG-PMS-LANU
(see Figure #4 below) will run
automatically during the software installation but it can also be started
from
Start/All Programs/Gembird/Power Manager
. The IP range where
you would like to search for EG-PMS-LANU will be set automatically
according to the IP settings of your LAN adapter but can be changed
manually in the
Adapter subnet
fields. Now press the
Search
button.
NOTE:
only EG-PMS-LANU within a local subnet can be found. If
your computer LAN adapter is not in the (default) subnet of EG-PMS-
LANU (as might probably be the case if you chose
option B
section 3.2)
you will have to change its IP address manually to be able to find EG-
PMS-LAN. For example if you wish to find EG-PMS-LANU (with the
default IP 192.168.0.254), the IP address of your computer should be set
as 192.168.0.
XXX
(where
XXX
stands for any digit, for example 1) and
the subnet mask should be 255.255.255.0.
After the searching the IP addresses of the found EG-PMS-LANU
devices will appear in the list box. Select EG-PMS-LANU which you want
to access, and press the
Open
button (see Figure #4 below).